[Udpcast] ahci-module?-trouble

Wolfgang Schmid dewschmid at web.de
Mon Mar 26 17:59:52 CEST 2007


I have a problem:
the sata disk (sda) is not recognized.
There is no option offered to choose a disk to copy...
(Everything works fine with older 'ide-machines')

Suse seems also to have some troubles? whereas knoppix works fine
Here is a part of the hardware-list suse 10.2. is producing:
any ideas?
Best regards, wolfgang!

I hope the length of the list below is not annoying...
...
39: IDE 00.0: 10600 Disk
  [Created at block.218]
  UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_ST3808110AS_9LR0G8CJ
  Unique ID: z70z.YnxUayP7NI9
  Parent ID: CLZK.13AlYnG+rp5
  SysFS ID: /block/sda
  SysFS BusID: 0:0:0:0
  SysFS Device 
Link: /devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "ST3808110AS"
  Device: "ST3808110AS"
  Revision: "3.AA"
  Serial ID: "9LR0G8CJ"
  Driver: "ahci", "sd"
  Driver Modules: "ahci"
  Device File: /dev/sda
  Device 
Files: /dev/sda, /dev/disk/by-id/scsi-SATA_ST3808110AS_9LR0G8CJ, /dev/disk/by-id/ata-ST3808110AS_9LR0G8CJ, /dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0, /dev/disk/by-id/edd-int13_dev80
  Device Number: block 8:0-8:15
  BIOS id: 0x80
  Geometry (Logical): CHS 9729/255/63
  Size: 156301488 sectors a 512 bytes
  Geometry (BIOS EDD): CHS 155061/16/63
  Size (BIOS EDD): 156301488 sectors
  Geometry (BIOS Legacy): CHS 1023/255/63
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (SATA controller)
...

...
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177
  <6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA 
mode
  <6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
  <6>ata1: SATA max UDMA/133 cmd 0xDC826100 ctl 0x0 bmdma 0x0 irq 177
  <6>ata2: SATA max UDMA/133 cmd 0xDC826180 ctl 0x0 bmdma 0x0 irq 177
  <6>ata3: SATA max UDMA/133 cmd 0xDC826200 ctl 0x0 bmdma 0x0 irq 177
  <6>ata4: SATA max UDMA/133 cmd 0xDC826280 ctl 0x0 bmdma 0x0 irq 177
  <6>scsi0 : ahci
  <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  <6>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
  <6>ata1.00: ata1: dev 0 multi count 16
  <6>ata1.00: configured for UDMA/133
  <6>scsi1 : ahci
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: ATAPI, max UDMA/100
  <6>ata2.00: configured for UDMA/100
  <6>scsi2 : ahci
  <6>ata3: SATA link down (SStatus 0 SControl 300)
  <6>scsi3 : ahci
  <6>ata4: SATA link down (SStatus 0 SControl 300)
  <5>  Vendor: ATA       Model: ST3808110AS       Rev: 3.AA
  <5>  Type:   Direct-Access                      ANSI SCSI revision: 05
  <5>SCSI device : 156301488 512-byte hdwr sectors (80026 MB)
  <5>sda: Write Protect is off
  <7>sda: Mode Sense: 00 3a 00 00
  <5>SCSI device sda: drive cache: write back
  <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
  <5>sda: Write Protect is off
  <7>sda: Mode Sense: 00 3a 00 00
  <5>SCSI device sda: drive cache: write back
  <6> sda: sda1 sda2 sda3 < sda5 sda6 >
  <5>sd 0:0:0:0: Attached scsi disk sda
  <5>  Vendor: PHILIPS   Model: DROM6316          Rev: DD01
  <5>  Type:   CD-ROM                             ANSI SCSI revision: 05
  <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
  <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
  <6>ATIIXP: IDE controller at PCI slot 0000:00:14.1
  <6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ATIIXP: chipset revision 0
  <6>ATIIXP: not 100% native mode: will probe irqs later
  <6>    ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:pio, hdb:pio
  <6>ATIIXP: simplex device: DMA disabled
  <6>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
  <7>Probing IDE interface ide0...
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <7>Probing IDE interface ide1...
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <4>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
  <6>Uniform CD-ROM driver Revision: 3.20
  <7>sr 1:0:0:0: Attached scsi CD-ROM sr0
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 
in
  <4>         res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 
in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 
in
  <4>         res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <4>Attempting manual resume
  <6>kjournald starting.  Commit interval 5 seconds
  <6>EXT3 FS on sda6, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  <6>ata2.00: configured for UDMA/100
  <6>ata2: EH complete
  <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
  <3>ata2.00: (irq_stat 0x40000001)
  <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
  <4>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal 
error)
  <6>ata2: soft resetting port
  <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  





More information about the Udpcast mailing list