From autuori.gianluigi.wintime at ansaldobreda.it Tue Apr 28 12:39:24 2009 From: autuori.gianluigi.wintime at ansaldobreda.it (Gianluigi Autuori) Date: Tue, 28 Apr 2009 12:39:24 +0200 Subject: [Udpcast] castomize udpcast iso image Message-ID: <3f774a470904280339u3d5e8ccfx421e45cc33a4f67@mail.gmail.com> I want to use Udpcast from iso image in this scenario: - first pc boots from udpcast iso image -second pc boots from ethernet using pxe that sends him udpreceiver How can I do it? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From breuer.jens at googlemail.com Tue Apr 28 13:37:28 2009 From: breuer.jens at googlemail.com (Jens Breuer) Date: Tue, 28 Apr 2009 13:37:28 +0200 Subject: [Udpcast] castomize udpcast iso image In-Reply-To: <3f774a470904280339u3d5e8ccfx421e45cc33a4f67@mail.gmail.com> References: <3f774a470904280339u3d5e8ccfx421e45cc33a4f67@mail.gmail.com> Message-ID: <76ce20420904280437y55f72af1s628383d2d83c02b6@mail.gmail.com> Hello Gianluigi, On Tue, Apr 28, 2009 at 12:39 PM, Gianluigi Autuori wrote: > I want to use Udpcast from iso image in this scenario: > - first pc boots from udpcast iso image > -second pc boots from ethernet using pxe that sends him udpreceiver How can > I do it? Use cast-o-matic to build an ISO-image and burn it on CD. Use cast-o-matic to build a custom init ramdisk (initrd) with udpreceiver as default. For PXE setup follow the instructions on the UDPCast site: http://udpcast.linux.lu/bootloader.html#pxe You will find cast-o-matic here: http://udpcast.linux.lu/cast-o-matic/ If this was not the information you were looking for, please explain in detail where your understanding ends. Regards Jens From breuer.jens at googlemail.com Tue Apr 28 14:05:08 2009 From: breuer.jens at googlemail.com (Jens Breuer) Date: Tue, 28 Apr 2009 14:05:08 +0200 Subject: [Udpcast] R: [SPAM] - Re: castomize udpcast iso image - Email found in subject In-Reply-To: References: <3f774a470904280339u3d5e8ccfx421e45cc33a4f67@mail.gmail.com> <76ce20420904280437y55f72af1s628383d2d83c02b6@mail.gmail.com> Message-ID: <76ce20420904280505j2e233f29k4704c682f8407fd5@mail.gmail.com> On Tue, Apr 28, 2009 at 1:50 PM, Autuori Gianluigi wrote: > But first pc must send init ramdisk (initrd) with udpreceiver as default, so first pc must have also tftp server Yes, that is the usual setup for booting via PXE. From breuer.jens at googlemail.com Tue Apr 28 17:10:31 2009 From: breuer.jens at googlemail.com (Jens Breuer) Date: Tue, 28 Apr 2009 17:10:31 +0200 Subject: [Udpcast] R: R: [SPAM] - Re: castomize udpcast iso image - Emailfound in subject In-Reply-To: References: <3f774a470904280339u3d5e8ccfx421e45cc33a4f67@mail.gmail.com> <76ce20420904280437y55f72af1s628383d2d83c02b6@mail.gmail.com> <76ce20420904280505j2e233f29k4704c682f8407fd5@mail.gmail.com> Message-ID: <76ce20420904280810l142b9493kd7e1d6e70d376e7e@mail.gmail.com> On Tue, Apr 28, 2009 at 2:50 PM, Autuori Gianluigi wrote: > I start the first pc with iso image of udpcast. > I configure eth manualy > Then I start sender and it waits for connection > > Now I switch on second pc and I select boot from network, but it doesn't find any dhcp server available udpcast does neither include a dhcp server nor a tftp server. As PXE booting is a somewhat more complex setup, you would need a separate PC (besides your udpsender and udpreceiver) which should run a (configured) tftpd and a (configured) dhcpd. Maybe you would be able to use Udpcast Image Generator to embed tftpd and dhcpd into udpcast. However, I would consider this a a pretty much time consuming task. So you really should try to get a third machine as a real server. From becariosfmat at gmail.com Thu Apr 30 11:07:57 2009 From: becariosfmat at gmail.com (Becarios Fmat) Date: Thu, 30 Apr 2009 10:07:57 +0100 Subject: [Udpcast] driver atl2 Message-ID: <43a09aba0904300207s78fc6b52pb4ca2fc0c751bf26@mail.gmail.com> Hello, I'm Spanish and I work in the La Laguna University. I love this tool, I never see another like this, it is simple and useful. BUT there isn't a atl2 network driver and it not works on we new computers. We try to use the udpcast boot image generator, but an kernel panic error is given. I'll like you can add de atl2 driver to the ready made boot images. Thanks. Cristo Javier Reyes Rodríguez ULL, Tenerife, España. -------------- next part -------------- An HTML attachment was scrubbed... URL: