[Udpcast] No success with imaging XP

[John Cook]

we here at alamance burlington scool system have been able to save and deploy
windows xp using udp cast but it had to be the new version and we had to run
sysprep on the image before we could send it out because we keep getting the
same error any questions email me back.

Alain Knaff <alain at knaff.lu> writes:
>On Monday 24 May 2004 14:44, Lee Baker wrote:
>> I'm trying to image a 20G drive containing XP Pro (NTFS) to a single
>> file on a Linux receiver and then transimt this image back to the same
>> XP box to test things are working ok.
>> I can create the image with no problems (no compression used) and then
>> udpcast the image back to the same machine it was taken from.  When I
>> reboot this machine I get "A disk read error occurred - Press
>> Ctrl+Al+Del to restart"
>> I've tried several times with no success - anyone got any ideas or
>> managed to get this to work?
>> Even the XP disk will not boot to allow repair - PC just hangs after it
>> has started inspecting setup.
>>
>> Thanks
>>
>> Lee Baker
>
>Weird. Do you image the whole disk (all partitions, /dev/hda), or just
>the partition containing XP (such as, for example /dev/hda1)?
>
>Are you sure you use the same compression settings for taking the
>image, and restoring it?
>
>Are you still able to do a complete install of XP (rather than
>repair...), or is that also not working?
>
>Could you also send me the first couple of sectors from that image
>(may be obtained with "dd if=image bs=512 count=50 of=first_sectors",
>and then mail me first_sectors)
>
>Thanks,
>
>Alain
>
>_______________________________________________
>Udpcast mailing list
>Udpcast at udpcast.linux.lu
>http://udpcast.linux.lu/mailman/listinfo/udpcast



 John Cook
Computer Technician
Alamance-Burlington School System
1712 Vaughn Rd.
Burlington, NC 27217
336-570-6090 x113